Buy MS Fittings ISO Certified Materials, Low Carbon Mild Steel Buttweld Fittings Specification Format.
Mild steels usually contain carbon ranging between 0.30% to 2.0% of the total weight of the alloy. Commonly referred to as low carbon steels, the Mild Steel Fittings differ from alloys steels as they are produced devoid of any additional elements like molybdenum, copper or nickel. The main alloying constituents of Mild Steel Weld Fittings include only carbon and iron, though the content of carbon is amongst the lowest. The lack of alloying elements is the main reason why the MS Pipe Fittings are amongst the most affordable products. In addition to this its composition yields a very ductile steel grade which makes it possible to form it into any shape. If a change in directional flow is desired, the use of Mild Steel 90 Degree Elbow makes it possible. Directional flow changes is a stressor that causes abrasions on the elbow. Hence for high velocity transportation, these elbows need to be surface treated by methods such as galvanization. Galvanization with a thick coating of zinc makes it possible to have some form of protection on the Mild Steel Buttweld Fittings. The lower content of carbon makes it possible to achieve good results during welding. However in places where welding operations are not possible, one can use Mild Steel Threaded Fittings as they permit for an easy attachment and the speed of joining them to piping systems is quick too.
Mild Steel Fittings Manufacturers In India
ASME B16.9 MS Fittings
Mild Steel Buttweld Fittings
Mild Steel Pipe Fittings
Mild Steel Threaded Fittings
ASME B16.9 MS Fittings Specification Format
Specification : | ASME B16.9 Mild Steel Fittings | |||
---|---|---|---|---|
Bending Radius | R=2D, 3D, 5D, 6D, 8D, 1D, 10D or Custom | |||
Thickness | SCH10, SCH 80, SCH 100, SCH20, SCH30, STD SCH40, SCH 160, XXS, SCH60, XS, SCH 120, SCH 140, available with NACE MR 01-75 | |||
size | Seamless ButtWeld Fittings: 1/2 - 10 inch Welded Butt Weld Fittings: 1/2" - 48" |
|||
Thickness | SCH10, SCH 80, SCH 100, SCH20, SCH30, STD SCH40, SCH 160, XXS, SCH60, XS, SCH 120, SCH 140, available with NACE MR 01-75 | |||
size | Seamless ButtWeld Fittings: 1/2 - 10 inch Welded Butt Weld Fittings: 1/2" - 48" |
|||
Type | DN15-DN1200 | |||
Dimensions | ASME B16.28, ASME/ANSI B16.9, BS1560, BS4504, MSS-SP-43, BS4504, BS10 | |||
Type | DN15-DN1200 | |||
Dimensions | ASME B16.28, ASME/ANSI B16.9, BS1560, BS4504, MSS-SP-43, BS4504, BS10 | |||
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) | |||
Connection | Welding | |||
Origin & Mills | Indian, Korean, Russian, Japanese, European | |||
Specialized manufacturer of | Crosses, Pipe Bend, Tees, 90º Elbows, Stub End, Reducers, 45º Elbows, Pipe Cap | |||
Mild Steel Fittings Manufacturers In India |
Chemical Equation Of High Carbon MS Pipe Fittings, Global Sales Network Of Quenching Mild Steel 90 Degree Elbow, Plain Mild Steel Threaded Fittings Dimensions Chart.
Chemical Analysis Of Mild Steel Buttweld Fittings
Element | Content (%) |
Fe | Balance |
Cr | 18-20 |
Ni | 11-15 |
Mo | 3-4 |
Mn | 2 |
Si | 1 |
P | 0.045 |
C | 0.03 |
S | 0.03 |
Low Mild Steel Elbow Dimensions Chart
NPS in millimeter | A in millimeter | D in millimeter |
15 | 34 | 30 |
20 | 39 | 36 |
25 | 43 | 41 |
32 | 46 | 50 |
40 | 52 | 58 |
50 | 60 | 71 |
65 | 70 | 88 |
80 | 79 | 100 |
100 | 98 | 126 |
150 | 134 | 180 |
Mild Steel Fittings Manufacturers In India |
---|
Hight Mild Steel Tee Dimensions Table
NPS in millimeter | A in millimeter | D in millimeter |
15 | 64 | 30 |
20 | 70 | 36 |
25 | 79 | 41 |
32 | 92 | 51 |
40 | 100 | 58 |
50 | 117 | 71 |
65 | 140 | 88 |
80 | 157 | 100 |
100 | 195 | 126 |
150 | 264 | 180 |
Black Mild Steel Cross Dimensional Formula
NPS in millimeter | A in millimeter | D in millimeter |
15 | 64 | 30 |
20 | 67 | 35 |
25 | 77 | 41 |
32 | 90 | 51 |
40 | 102 | 58 |
Plain Mild Steel Plug Dimensional Format
NPS in millimeter | A in millimeter | D in millimeter |
15 | 24 | 13 |
20 | 27 | 15 |
25 | 31 | 19 |
32 | 35 | 24 |
40 | 37 | 27 |
50 | 45 | 33 |
65 | 45 | 34 |
80 | 45 | 38 |
100 | 51 | 46 |
Low Temp Mild Steel Weld Fittings Suppliers In India, Fittings Used To Join Mild Steel Pipes Weight Chart Table, Offer A Huge Selection Of High Quality Galvanised Mild Steel Pipe Fittings.
Weight Formula Of MS Pipe Fittings
Normal Size Of Pipe | LBS | Kilogram |
1/2 | 0.25 | 0.11 |
3/4 | 0.25 | 0.11 |
1 | 0.5 | 0.23 |
1¼ | 0.9 | 0.41 |
1½ | 1.15 | 0.52 |
2 | 2.2 | 1 |
2½ | 4 | 1.81 |
3 | 6.5 | 2.95 |
3½ | 8.35 | 3.79 |
4 | 13.5 | 6.12 |
5 | 22 | 9.98 |
6 | 35 | 15.88 |
8 | 71 | 32.21 |
10 | 107 | 48.53 |
12 | 160 | 72.57 |
14 | 205 | 92.99 |
16 | 276 | 125.19 |
18 | 340 | 154.22 |
20 | 420 | 190.51 |
22 | 520 | 235.87 |
24 | 600 | 272.16 |
26 | 729 | 330.67 |
30 | 975 | 442.25 |
36 | 1412 | 640.47 |
Mild Steel Fittings Manufacturers In India |
---|
Check Killed Mild Steel Bsp Pipe Fittings Mechanical Chart, Get Instant Delivery Of Black Mild Steel Pipe Fittings, Visit Our Galvanised Mild Steel Elbow And MS Tee Mill In India.
Mild Steel 90 Degree Elbow Mechanical Strength
Properties | Metric | Imperial |
Elongation at break (in 50 mm) | 55% | 55% |
Hardness, Rockwell B | 85 | 85 |
Tensile strength | 595 MPa | 86300 psi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Yield strength | 260 MPa | 37700 psi |
Modulus of elasticity | 200 GPa | 29000 ksi |
Galvanized Mild Steel Screwed Pipe Fittings Temperature Ratings And Fully Killed Mild Steel Socket Weld Fittings Size Chart, ASME B16.9 Mild Steel Fittings Manufacturers In India.
Mild Steel Bsp Pipe Fittings Pressure Rating
Pressure Rating (psig) | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Normal Size Of Pipe (inch) |
Pipe Sch. | OD (inch) |
Wall Thick. (in) |
Temp. | ||||||||
100 | 200 | 300 | 400 | 500 | ||||||||
16700 | 16700 | 16700 | 15500 | 14400 | ||||||||
1" | 40 | 1.315 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | ||||
80 | 1.315 | 0.179 | 3061 | 3061 | 3061 | 2841 | 2640 | |||||
160 | 1.315 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | |||||
1 1/2" | 40 | 1.900 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | ||||
80 | 1.900 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | |||||
160 | 1.900 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | |||||
2" | 40 | 2.375 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | ||||
80 | 2.375 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | |||||
160 | 2.375 | 0.344 | 3283 | 3283 | 3283 | 3047 | 2831 | |||||
3" | 40 | 3.500 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | ||||
80 | 3.500 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | |||||
160 | 3.500 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | |||||
4" | 40 | 4.500 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | ||||
80 | 4.500 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | |||||
160 | 4.500 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | |||||
5" | 40 | 5.563 | 0.258 | 965 | 965 | 965 | 896 | 832 | ||||
80 | 5.563 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | |||||
160 | 5.563 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | |||||
6" | 40 | 6.625 | 0.280 | 877 | 877 | 877 | 814 | 756 | ||||
80 | 6.625 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | |||||
160 | 6.625 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | |||||
8" | 40 | 8.625 | 0.322 | 771 | 771 | 771 | 716 | 665 | ||||
80 | 8.625 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | |||||
160 | 8.625 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | |||||
10" | 40 | 10.750 | 0.365 | 699 | 699 | 699 | 649 | 603 | ||||
80 | 10.750 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | |||||
160 | 10.750 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | |||||
Mild Steel Fittings Manufacturers In India |
Different Types Of Mild Steel Weld Fittings
6 Inch, SCH 10S, Seamless, Mild Steel 90D LR Elbow
3 Inch, ASME B16.9, SCH 40S, Mild Steel SR 180 Deg Elbow
10 Inch, ASME B16.9, SCH 100, Mild Steel 45 Deg Elbow
20 Inch, DN200, SCH 40, BW Ends, ASME B16.9, MS 90D LR Elbow
8 × 4 Inch, Buttweld, SCH STD, Mild Steel Eccentric Reducer
4 X 2 Inch, SCH 60, ASME B16.9, Mild Steel Concentric Reducer
6 X 3 Inch, Buttweld, ASME B16.9, MS Concentric Reducer
10 X 5 Inch, SCH 40, ASME B16.9, Butt Weld, Mild Steel ECC Reducer
2 Inch, SCHXS, ASME B16.9, Butt Weld, Mild Steel Reducing Tee
6 Inch x 4 Inch, Sch 80, Mild Steel BW Reducing Tee
3 Inch, ASME B16.9, DN500, Welded SCH XS, Mild Steel Equal Tees
1 Inch, DN350, SCH 120, Seamless, MS Equal Tee
Mild Steel Screwed Fittings Size Chart
Products | Size |
Mild Steels Cups | 1/2'' NB to 14'' NB |
Mild Steels Stub Ends | 1/2'' NB to 14'' NB |
Mild Steels Elbow | 1/2'' NB to 14'' NB |
Mild Steels Reducers | 1'' NB to 14'' NB |
Mild Steels Tees | 1'' NB to 14'' NB |
Mild Steels Socket Weld | Up to 2'' NB |
Mild Steels Nipples | Up to 4'' |
Mild Steels Couplings | Up to 4''NB |