Our MDPE water pipe fittings are available in sizes 20mm to 125mm.
These fittings are approved for above and below ground use, and can be used for potable (drinking) water applications with blue and black MDPE pipe.
MDPE compression fittings are simple to install. To ensure the fitting nuts are sufficiently tightened, we recommend using a strap wrench.
Pressure Rating
16 bar
Safety Factor
3
Operating Temperature
20°C @ 16 bar, 45°C @ 10.8 bar, 70°C @ 3.4bar
Standards
UNI 9561-9562, UNI EN 712-713-715, UNI ISO 7/1, ISO 14236, UNI 2233
All of our MDPE compression fittings have a Safety Factor of 3, ensuring that spikes in water pressure within a water pipe system are catered for. The majority of our fittings have a pressure rating of 16 bar, however there are a few exceptions which are as follows:
Female adaptor 75mm x 2" to 110mm x 4" - 10 bar
90° female threaded tee from 75mm x 2" to 110mm x 4" - 10 bar
90° female threaded elbow from 75mm x 2" to 110mm x 4" - 10 bar
Safety factor based upon maximum working pressure at the temperature of 20°
Downloads:
Basic installation guide (click on the PDF icon to download)
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.